Connections, Operating And Display Elements; Important; Led Display - Cameo FLAT MOON Manual De Usuario

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

5
POWER IN
IEC mains input socket with built-in fuse holder. Operating voltage 100 – 240 V AC / 50 – 60Hz. A suitable IEC power cable is included.
IMPORTANT: Replace the fuse only with a fuse of the same type and of the same value according to the stamp on the housing! In the event
of repeated fuse failure, please contact an authorised service centre.
6
POWER OUT
IEC power output socket. Facilitates power supply to other CAMEO lights. Ensure that the total current consumption of all connected devices
does not exceed the value specified on the device in amperes (A).
7
DMX IN
Male 3-pin XLR socket for connection to a DMX control device (e.g. DMX console).
8
DMX OUT
Female 3-pin XLR socket for sending the DMX control signal.
9

LED DISPLAY

Displays the current operating mode and other system settings.
6
10
13
7
8
9 11
12
5
6