Topcom Twintalker 5400 Manual De Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Twintalker 5400
12.7.1 Changing sub-channels
Press the
no sub-channel) will blink.
Use the
channel:
1..38:
CTCSS code (1...38)
39..121: DCS code
Press the PTT - key
Annex B will show all detailed information about the CTCSS and DCS sub-channel codes.
12.8
Making a call
When you press the
channel/sub-channel.
This will indicate that you want to start a conversation.
Press the
There are 5 different call tones. You can select a call tone in the menu:
Press the
Use the
Press the PTT - key
12.9
Monitor
You can use the monitor function to check for weaker signals in the current channel.
Press the MON - key
to start monitoring.
13
If you hold this key for more than 3 seconds, the radio will go into continuous monitoring mode.
Press the key again to disable the monitor function.
12.10
Channel Scan
Channel scan performs a search for active signals in an endless loop from channel 1 to 8.
Once an active channel is found, the scanning will stop so you can listen to the conversation.
If there is no more activity on the found channel, the scanning will resume after two seconds.
If you press the PTT- key
on the found channel, the scan function will end and the radio will remain on this channel.
15
Press the
Use the
Press the
The scanning will stop once the PTT - key
12.11
VOX
When the optional headset (without PTT-key) is connected, the voice activated transmission function (VOX) can be used.
This way, the user does not need to press the PTT button to start transmitting. The Twintalker 5400 will start transmitting when you
start talking into the microphone of the headset.
Press the
Use the
disable VOX. (there are 5 VOX levels)
Level 1 : Highest sensitive for quite environments
...
Level 5 : Lowest sensitivity for noisy environments
Press the PTT - key
- key
5
: The current selected sub-channel (or "oF" in case of
- key
or the
- key
11
to select the desired sub-
12
(1...83)
to confirm
14
- key
you will transmit a call tone to the other users on the same
10
- key
10
- key
5
four times
- key
or the
- key
11
to select the call tone
12
to confirm.
14
- key
5
two times
- key
or the
- key
11
to select Y for scanning
12
- key
5
to confirm : Scanning will begin
is pressed.
14
5
- key
three times
to select the VOX level or oF to
- key
or the
- key
11
12
to confirm
14
12.12
Roger Beep On/Off
After the PTT - key
is released, the unit will send out a roger beep to confirm that you have stopped talking.
15
The Roger Beep can be switched On or Off:
Press the the
Use the
Roger Beep
Press the PTT - key
12.13
Key Beep On/Off
When a key is pressed, a tone can be heard.
The key beep can be switched On or Off:
Press the
Use the
key tone
Press the PTT - key
12.14
Key lock
Press and hold the
lock function.
When key lock is enabled, the PTT- key
key the
will still be operational. All other keys are locked.
13
Warranty
13.1
Warranty period
The devices have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. There is no warranty
on standard or rechargeable batteries.
Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be
proven by presentation of the original or copy of the purchase receipt, on which the date of purchase and the unit-model are indicated.
13.2
Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories are
not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during
transportation. No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible. Any
warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer
This product is in compliance with the essential requirements and other relevant provisions of the R & TTE directive
1999/5/EC.
The Declaration of conformity can be found on :
http://www.topcom.net/support/cedeclarations.php
- key
5
five times
- key
or the
- key
to enable (Y) or disable (n) the
11
12
to confirm
14
- key
six times
5
- key
for the
- key
to enable (Y) or disable (n) the
11
12
to confirm
14
-key
10
for three seconds to activate/deactivate the key
, the volume control-keys, the monitor-key (MON) and the call-
14
5

Publicidad

Tabla de contenido
loading

Tabla de contenido