Hilti NURON SC 30WL-22 Manual De Instrucciones Original página 16

▶ Dust produced by grinding, sanding, cutting and drilling can contain
dangerous chemicals. Some examples are: lead or lead-based paints;
brick, concrete and other masonry products, natural stone and other
products containing silicates; certain types of wood, such as oak,
beech and chemically treated wood; asbestos or materials that contain
asbestos. Determine the exposure of the operator and bystanders
by means of the hazard classification of the materials to be worked.
Implement the necessary measures to restrict exposure to a safe level,
for example by the use of a dust collection system or by the wearing
of suitable respiratory protection. The general measures for reducing
exposure include:
▶ working in an area that is well ventilated,
▶ avoidance of prolonged contact with dust,
▶ directing dust away from the face and body,
▶ wearing protective clothing and washing exposed areas of the skin
with water and soap.
▶ Before starting work, check the hazard class of the dust that will be
produced when working. Use an industrial vacuum cleaner with an
officially approved protection classification in compliance with locally
applicable dust protection regulations.
▶ Comply with national health and safety requirements.
▶ Use clamps or some other practical means to secure the workpiece and
keep it in a stable position. Attempting to stabilize the workpiece by
hand or with your body is inadequate and can result in loss of control.
Do not have the workpiece held in position by a helper.
▶ Do not look directly into the light source (LED) of the product and do not
aim the beam at other persons' faces. Risk of dazzling or eye damage.
▶ Always engage the transport lock before storing or transporting the saw.
This prevents unintentional starting of the product.
▶ Risk of injury by falling tools and/or accessories. Before starting work,
check that installed accessories are secure.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and water
pipes are present. External metal parts of the power tool may become
live, for example, when an electric cable is damaged accidentally. This
constitutes a serious risk of electric shock.
Using and handling the power tool
▶ To avoid damage to the product, use the scaffold hook to hang up
the product at a secure location only. Maximum height for storage:
50 cm/20 in. Make sure that the product is securely engaged on the
scaffold hook.
10 English 2264106
*2264106*