Intended Use - Hilti NURON SC 30WL-22 Manual De Instrucciones Original

▶ If the battery is too hot to touch, it may be defective. Put the battery
in a place where it is clearly visible and where there is no risk of fire,
at an adequate distance from flammable materials. Allow the battery
to cool down. If it is still too hot to touch after an hour, the battery is
faulty. Consult Hilti Service or read the document entitled "Instructions
on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage
and use of lithium-ion batteries. → page 20
Read the instructions on safety and use of Hilti Li-ion batteries
that you can access by scanning the QR code at the end of these
operating instructions.
3 Description
3.1 Product overview
Auxiliary grip
@
Scaffold hook (optional)
;
Cutting depth scale
=
Transport lock
%
On/off switch
&
Battery compartment release
(
button
Hex key
)
Clamping lever for cutting
+
depth adjustment
Operating lever for lower
§
guard
Lower guard
/
Arbor
:
Base plate
∙

3.2 Intended use

The product described is a cordless circular saw. It is designed for sawing
wood or wood-like materials, plastics, drywall panel, gypsum fiber board
and composite materials.
The circular saw is equipped with a hose connector for an optional dust
extractor; this connector fits standard-diameter vacuum cleaner hoses. A
suitable adapter might be required for connecting the dust-extractor hose
to the saw.
▶ Use only saw blades approved for the product that comply with the
specifications set out in the technical data (e.g. diameter, speed of
12 English
1
$
£
|
¡
Q
W
E
R
T
Z
U
I
O
P
0° cutting line indicator
45° cutting line indicator
Work-area light
Direction-of-rotation arrow
Mounting flange
Clamping flange
Clamping screw
Grip
Battery
Spindle lock button
Cutting angle scale
Clamping lever for cutting
angle adjustment
Battery release button
Battery status indicator
2264106
*2264106*