Handling Electrical Cables - Dometic B 16000PLUS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
B1600PLUS, B2200, B2600
NOTICE!
A
 Only use the device as intended.
 The roof air conditioner is not suitable for use in agricultural or
construction vehicles.
 Do not make any alterations or conversions to the device.
 Never drive through automatic car washes when the roof air
conditioner is mounted.
 If faults occur in thes refrigerant circuit, the system must be
checked by a specialist company and repaired properly. The re-
frigerant must never be released into the air.
NOTE
I
 Please ask your vehicle manufacturer if a technical inspection is
required after fitting an air conditioner and whether the height
entered in the vehicle documents needs to be altered
(increased height 235 mm).
2.2

Handling electrical cables

WARNING!
!
 The electrical power supply may only be connected by a quali-
fied electrician (e.g. VDE 0100, Part 721 in Germany).
CAUTION!
!
 Fit a fuse of at least 10 amps to the connection with the vehicle's
power supply.
 Attach and lay the cables so that they cannot be tripped over or
damaged.
NOTICE!
A
 Use cable ducts to lay cables through walls with sharp edges.
 Do not lay loose or bent cables next to electrically conductive
materials (metal).
 Do not pull on the cables.
EN
All manuals and user guides at all-guides.com
Safety and installation instructions
25

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

B 2200B 2600

Tabla de contenido