Handling Electrical Cables - Dometic FreshWell 2000 Instrucciones De Montaje

Dometic FreshWell 2000
CAUTION!
!
 The under-bench air conditioner must be installed securely so
that it cannot fall down.
 Only operate the under-bench air conditioner if you are certain
that the housing and the cables are not damaged.
 Do not use the under-bench air conditioner near flammable
fluids.
 Make sure no combustible objects are stored or installed near
the air outlet. A distance of at least 50 cm must be kept.
 Do not reach into air outlets or insert any foreign objects in the
device.
NOTICE!
A
 Only use the device as intended.
 The under-bench air conditioner is not suitable for use in agri-
cultural or construction vehicles.
 Do not make any alterations or conversions to the device.
 If faults occur in this refrigerant circuit, the system must be
checked by a specialist company and repaired properly. The re-
frigerant must never be released into the air.
2.2

Handling electrical cables

WARNING!
!
 The electrical power supply may only be connected by a quali-
fied electrician (e.g. VDE 0100, Part 721 in Germany).
CAUTION!
!
 Fit a fuse of at least 10 amps to the connection with the vehicle's
power supply.
 Attach and lay the cables so that they cannot be tripped over or
damaged.
NOTICE!
A
 Use cable ducts to lay cables through walls with sharp edges.
 Do not lay loose or bent cables next to electrically conductive
materials (metal).
 Do not pull on the cables.
EN
Safety and installation instructions
17