Attaching The Toys - Evenflo BABY ACTIVE exer saucer 61912186 Manual Del Usuario

Attaching the Toys

I > !
E
To place Cap Toy into Leg Cap
I > !
Cap.
To remove Cap Toy from ExerSaucer, grab toy near Leg Cap and pull straight up.
CLICK!
To install stalk toys, press firmly into tray until you hear an audible click.
Pull up on stalk toys to make sure they are locked in place.
To remove stalk toys, squeeze tabs
, push end of toy into opening in top of Leg
E
I > @
Remove
and lift stalk toys from tray.
I > @
6
Attach toys by inserting straight edge
into opening and rotating down, as
shown. Press firmly into tray until you
hear an audible click.
Note: Some toys cannot be removed
after assembly.
CLICK!
Attaching the Toys
3 "AAA" Batteries
Refer to battery door
for quantity and size of
batteries.
To remove toy, press tabs from
underside of Tray and lift toy from
D
Tray.
D
7