cam COMBI FAMILY Instrucciones De Uso página 29

IMPORTANT! KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
1. Read these instructions carefully before use. The safety of your child could be at risk if the
following instructions are not followed. 2. WARNING! Never leave your child unattended. 3.
WARNING! Make sure that all the locking devices are correctly engaged before use. 4.
WARNING! To avoid injury ensure that your child is kept away when unfolding and folding
this product. 5. WARNING! Do not let your child play with this product. 6. WARNING! Always
use the restraint system. 7. WARNING! This product has not been designed for skating or
running. 8. ATTENTION! This product has been designed for children from birth to 15 kgs in
weight. 9. ATTENTION! We recommend to use the most reclined position of the backrest
for new born babies. 10. ATTENTION! Do not use accessories which are not approved by the
manufacturer. 11. ATTENTION! Correctly engage the brake unit when the child is put in the
product or removed from it. 12. ATTENTION! Do not put weights on handle, backrest and
on the sides of the product: this should effect its stability. Never load the basket with more
than 2 kgs. 13. This product has been designed for 1 child at a time. Never carry more than
1 child at a time. 14. ATTENTION: Cam il mondo del bambino reserves all the rights to
amend the product for technical or commercial reasons. 15. ATTENTION: always use the
product as it has been produced; on the contrary the producer will not be held responsible
for any misuse. In case of missing or broken parts, we recommend you to use original spare
parts supplied by the manufacturer only. 16. WARNING! Never use the crotch strap without
the waist strap. 17. ATTENTION! In case you need to use an additional harness, fasten it to
the D rings (fig 31). 18 ATTENTION! Check there are no parts broken , bended or torn
before using the product. 19. WARNING: Check that carrycot, car seat or pushchair securing
devices are correctly fitted before using. 20. Carrycot is suitable for children who cannot seat
down unaided, roll or who cannot lift up on their hands or knees. 21. Car seat and pushchair
do not replace a carrycot or a bed. Should your child need to sleep, then he should be placed
in a suitable cot or bed. 22. WARNING! Do not put a mattress in the carrycot (optional) with
a thickness of more than 20 mm. 23. Frame of the product is suitable for carrycot and car
seat (optional) approved by manufacturer only and provided with QUICKY SYSTEM
mechanism. 24. WARNING! Do not use the frame without carrycot/pushchair/car seat to
carry your child.CONFORMS TO SAFETY STANDARD - EN 1888:2012
INSTRUCTIONS FOR USE
1. HOW TO POSITION THE LINKED PUSHCHAIR HANDLE:
Turn the handle by pressing simultaneously the two
buttons marked "A" on either sides of the linked handle.
In this way you can also adjust the height of the handle
to the desired position.
2. HOW TO OPEN THE PUSHCHAIR: To open the
pushchair, operate lever "B" situated on the right hand
side of the pushchair in an upward direction as shown by
the arrow, and then by pushing downwards part "S" until
it reaches the locked position.
The rear leverage plate (part "S") is to help you
manoeuvring small obstacles but pay ATTENTION! Do
not use it to carry a second child and do not load it with
any other weight as this could make the pushchair
unstable and possibly damaged.
ATTENTION! The frame is completely open only if red
indicators are hidden.
3. FRONT WHEELS: to make the front wheels swivel, push
INSTRUCTIONS FOR USE
part "X". To lock the swivel wheels: align the wheels and
push part "X" upwards.
4. REAR WHEELS WITH BRAKE: To engage the linked brake push
the ON pedal downwards (fig 4a) to disengage the linked brake
push the OFF pedal downwards (fig 4b). ATTENTION! Never
push the "ON" lever in an upwards direction when releasing the
brake.
5. HOW TO CLOSE THE PUSHCHAIR: Execute the sequence
shown in picture (5)
6a. HOW TO ADJUST THE BACKREST: operate on the lever
"E" to recline the backrest in different positions (fig 6/B).
7. ADJUSTING THE FOOTREST: To lower the footrest raise
lever F (Part b) and at the same time push downwards on
the footrest.
8a. HOW TO USE THE BUMPER BAR: Turn outwards
parts "Y" and insert the bumper bar into the holes
located in the armrests. To remove it, turn the parts
"Y" and take it off.
9. REMOVING THE REVERSIBLE SEAT UNIT: hold seat unit
27