DeWalt DCD443 Manual De Instrucciones página 13

Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a D
D WALT authorized service center. Always use identical
e
replacement parts.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories

WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact D WALT call 1-800-4-D
e
visit our website:www.dewalt.com.
MAXiMUM RECOMMENDED CAPACiTiES
E-Clutch® System
RPM
WOOD
Auger
Self-feed
Hole saw
METAL
Twist
NOTE: Quick release hex chuck accepts 7/16'' (11 mm) bits and accessories
only. These numbers are with the DCB609 battery with the DCD445 and
DCD444, and the DCB208 battery with the DCD443.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERViCE: Registering your product will help
you obtain more efficient warranty service in case there is
a problem with your product.
• CONFiRMATiON OF OWNERShiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
WALT factory service center or a
e
WALT recommended
e
WALT (1‑800‑433‑9258) or
e
YES
0–1250
1-3/8" (35 mm)
2-9/16" (65 mm)
4" (102 mm)
7/16" (11 mm)
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
• Register online at www.dewalt.com
Three Year Limited Warranty
For warranty terms, go to https://www.dewalt.com/Legal/
Warranty/3-Year-Limited-Warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D WALT Industrial Tool Co., 701 East
e
Joppa Road, Towson, MD 21286 or call 1-800-4-D
(1‑800‑433‑9258).
LATiN AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARNiNg LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-4-D
(1‑800‑433‑9258) for a free replacement.
ENgLiSh
WALT
e
WALT
e
11