Screen Research X-MASK X4R Manual De Instalación página 10

página de 44

/ 44
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

ENGLISH - Fixed frame screen user manual

The type of motor installed on the product is identified by a label applied on each product showing the CE logo. When unwrapping the product please check the model type indicated on the label in order to

perform the installation and cable connections correctly. Should the power of the motor be different from that of the supply network of the installation place, please contact an electrician to have a current and

Hz transformer installed.

electric cabling must be conformant with applicable IEC standards. IEC norm EN 60335-1 requires that supply network be

fitted with an omnipolar selector switch with contact opening distance of at least 3 mm. For the screen's control use only

the selector switch provided by manufacturer, or equivalent model. The selector switch must be mounted within sight

distance of the product, at a 1.5 - 1.8 m height from the floor.

Correctly performed, state-of-the-art, norm-compliant electrical connections are important to prevent accidents and to

ensure the screen's optimal and unaltered performance over time. Prior to carrying out any operation on electrical parts

ensure that power supply is disconnected

Somfy 230V 50Hz

MOTOR

EU or UK or US

PLUG

Volt: 230V AC

HORIZONTAL

Frequency: ~Hz50

MASKING

Power: 90W

Torque: 6Nm

Motor

Speed: 17RpM

characteristics

Max no. of cycles: 2

Screen

Screen ≤ ≤ ≤ ≤ 130

Screen

130

130" " " "

Operating T°: from –20 to +55 °C

Volt: 230V AC

HORIZO

HORIZONTAL

NTAL

Frequency: ~Hz50

MASKING

Power: 140W

Torque: 15Nm

Motor

Speed: 17RpM

characteristics

Max no. of cycles: 2

screen

screen ≥130

screen

≥130" " " "

≥130

Operating T°: from –20 to +55 °C

Before to do the electric cabling , read carefully the complete instruction of the MCS. Should the power of the motor be different from that of the supply network of the installation place, please contact an

electrician to have a current and Hz transformer installed.

ELECTRICAL CONNECTION:

ELECTRICAL CONNECTION: electric cabling must be conformant with applicable IEC standards. IEC norm EN 60335-1 requires that supply network be fitted with an omnipolar

ELECTRICAL CONNECTION:

selector switch with contact opening distance of at least 3 mm.

For each motor (e.g. plug switch etc.). In case of need, this device ensures that the power supply is safely and quickly cut off.

Use the wires as described in the figure.

ATTENTION:

This product contains two motors, which must both be wired in the same manner.

Bus cables must be insulated if not used for the push-button command.

WARNING:

WARNING: Correctly performed, state-of-the-art, norm-compliant electrical connections are important to prevent accidents and to ensure the screen's optimal and unaltered

performance over time. Prior to carrying out any operation on electrical parts ensure that power supply is disconnected.

Bus cables (black white orange) must be insulated if not used for the push-button command.

Somfy ILT4

Somfy ILT4 characteristics:

Somfy ILT4

characteristics:

A A A A Power supply:

Power supply: 90 ÷ 225 Vac 50/60 Hz

Power supply:

Protection rating: IP20 (with container intact)

Protection rating:

Operating temper

Operating temperature:

Operating temper

ature: -0° C . +60° C

ature:

D D D D imension

imension

imensions: s: s: s: 137 x 80 x 40 mm

imension

SOFTWARE:

For remote the screen with ILT4 and serial command (RS232 o RS485) are available the follow software: EventGhost_0.3.7.r1170

(Download:

http://www.eventghost.org/downloads/EventGhost_0.3.7.r1462_Setup.exe

(Download package:

Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE

Please verify that you are working with the latest revision of this document before specifying your screen.

All manuals and user guides at all-guides.com

09 09 09 09 MOTOR TYPE IDENTIFICATION

MOTOR TYPE IDENTIFICATION – – – – CHARACTERISTICS

MOTOR TYPE IDENTIFICATION

ELECTRICAL CONNECTION:

WARNING:

Somfy 120V 60Hz

US US

Volt: 120V AC

Frequency: ~Hz60

Power: 110W

Torque: 6Nm

Speed: 38RpM

Max no. of cycles: 2

Operating T°: from –20 to +55 °C

Volt: 120V AC

Frequency: ~Hz60

Power: 210W

Torque: 15Nm

Speed: 38RpM

Max no. of cycles: 2

Operating T°: from –20 to +55 °C

CONNECTION

CONNECTION SOMFY ILT4 (options not included)

http://www.screenresearch.com/website/documents/software_current/ILT%20interface.rar

CHARACTERISTICS – – – – ELECTRICAL CONNECTION

CHARACTERISTICS

ELECTRICAL CONNECTION

The screens with motorization SOMFY are equipped with cables complete of

the switch for the surface movement and of Plug for connection to the

electricity. The screens and the cables, are included of quick connectors.

The screens with motorization LUTRON are

equipped with quick connectors for

connection to transformers or

management systems LUTRON

Somfy 230V 50Hz

MOTOR

EU or UK or US

PLUG

Volt: 230V AC

VERTICAL

Frequency: ~Hz50

MASKING

MASKI

Power: 90W

Torque: 6Nm

Motor

Speed: 17RpM

characteristics

Max no. of cycles: 2

Screen

Screen ≤ ≤ ≤ ≤ 170

Screen

170

170" " " "

170

Operating T°: from –20 to +55 °C

Volt: 230V AC

VERTICAL

Frequency: ~Hz50

MASKING

Power: 140W

Torque: 15Nm

Motor

Speed: 17RpM

characteristics

Max no. of cycles: 2

screen ≥ ≥ ≥ ≥ 171"

screen

171"

Operating T°: from –20 to +55 °C

SOMFY ILT4 (options not included)

)

Somfy 120V 60Hz

US US

Volt: 120V AC

Frequency: ~Hz60

Power: 110W

Torque: 6Nm

Speed: 38RpM

Max no. of cycles: 2

Operating T°: from –20 to +55 °C

Volt: 120V AC

Frequency: ~Hz60

Power: 210W

Torque: 15Nm

Speed: 38RpM

Max no. of cycles: 2

Operating T°: from –20 to +55 °C

)

Page 10

Tabla de Contenido

Tabla de contenido

Screen Research X-MASK X4R Manual De Instalación página 10

Idiomas disponibles

Manuales relacionados para Screen Research X-MASK X4R

Productos relacionados para Screen Research X-MASK X4R

Tabla de contenido