Hinkley TURBINE 904280FCW-LWD Manual Del Usuario página 15

Option 3. Multi Gang Wall Switch Box Installation
1 Remove the existing wall plate and old switch from the wall outlet box. (Fig. 3)
Connect the black lead wires from the switch in the cradle A to the black wires in the switch box. Hot input wire to one of the cradle
2
switch leads. Power lead to the fan is connected to the remaining switch lead. (Fig. 4)
3
Attach the cradle A to the wall switch box using the supplied hardware.
4 Attach the multi-gang faceplate to the switch set in the wall outlet box. Cradle A of Hinkley switch will fit in any standard decora
face plate.
5
Remote transmitter will be held in place with built in magnets.
Outlet box
Switch
Fig. 3
HIRO Control System
Outlet box
Face plate
Fig. 4
Cradle A
Face plate
Transmitter
©2021 Hinkley Lighting, Inc. | hinkley.com | 13