Battery Replacement - TFA 60.2016 Instrucciones De Uso

TFA_No. 60.2016_Anleitung
Alarm clock
• Confirm with the SET button.
• Slide the ALARM 1 ON/OFF switch to ON.
• The alarm is activated. ON - the weekdays and the alarm time appear
on the display.
• Once the alarm rings, the alarm symbol flashes.
• Press any button to stop the alarm or press the top of the instrument
(SNOOZE/LIGHT) to activate the snooze function. The backlight turns
on for a few seconds.
• The alarm will be interrupted for 5 minutes.
• Slide the ALARM 1 ON/OFF switch to OFF to deactivate the alarm.
OFF appears on the display.
Alarm 2:
• Press and hold the DOWN button.
• M-F, S-S flashes.
• Set Alarm 2 in the same way as Alarm 1.
8. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if the device will not be used for an extended
period of time.
• Keep the device in a dry place.
20
26.04.2016 13:43 Uhr Seite 11
Alarm clock

8.1 Battery replacement

• Change the batteries when the device functions become weak.
• Open the battery compartment and insert three new batteries AAA
1,5 V. Ensure the batteries' polarity are correct.
• Close the battery compartment again.
9. Troubleshooting
Problems Solution
➜ Ensure the batteries' polarity are
No display
correct
➜ Change the batteries
➜ Restart the instrument according to
Incorrect indication
the manual
➜ Change the batteries
If your device fails to work despite these measures contact the retailer
where you purchased the product.
10. Waste disposal
This product has been manufactured using high-grade materials and
components which can be recycled and reused.
21