Spare Parts - Heiniger XPLORER Traducción Del Manual Original

Malfunction
Lowest LED on char-
ger is not lit.
Normal charging does
not start when the
discharged battery is
inserted.
Bottom LED lights up
green.
Top LED lights up red. Faulty battery.
8

Spare parts

See spare parts list at the end of these operating instructions.
CAUTION!
FAULTY SPARE PARTS MAY CAUSE DAMAGES, MALFUNCTIONS OR TOTAL
LOSS AND MAY REDUCE SECURITY.
Use only original spare parts from the manufacturer. Obtain spare parts from an
X
authorised dealer or directly from the manufacturer.
NOTE!
If non-approved parts are used, all warranty, service, compensation and liability
X
claims against the manufacturer or its employees, dealers and representatives will
be forfeited.
During the warranty period the device must be opened only by personnel authorised by the
manufacturer, otherwise the warranty will be void.
Pos. Description
No.
Clipper
1 Clipper head cattle complete
2 Tension nut cattle
3 Distance screw
4 Tension sleeve
5 PH screw M5x14
6 Clipper head case
7 Pressure spring
8 Pressure plate
9 Eccentric square
10 Socket head cap screw with
shank M3x6
18
Cause
Charging station is not
connected to the power
supply.
Electronics or power supply
unit defective.
Battery terminals and/or char-
ger are dirty.
Faulty battery.
Electronics are defective.
Battery is deeply discharged,
the charger is trying to boost
the battery voltage.
Qty.
1
1
1
1
2
1
1
1
1
2
Translation of the original instructions / Cattle and Horse Clipper
Rectification
Connect the charging station to the
power supply.
Notify customer service.
Clean contacts.
Replace battery.
Notify customer service.
If it is successful, normal charging
starts. (Never store batteries in the
discharged state).
If it is not successful, the lowest LED
lights up red (see the following table).
Replace battery.
Pos. Description
No.
32 Catch spring for switch
33 Lower housing cover
34 Motor holder, front
35 Motor holder, rear
36 Battery Li-Ion
37 PCB for machine
38 Switch contact
39 Cheese-head screw M2.6x6
40 Motor housing upper, incl.
switch lever
41 Cord
45 Motor complete
Qty.
1
1
1
1
1
1
1
2
1
1
1