Philips HQ9170CC Manual Del Usuario página 10

EnglisH
12
4 Place the washing machine back onto the
cleaning chamber.
Make sure the release buttons snap back into place.
5 Connect the powerplug to the washing
machine.
The holder automatically moves to the highest
position.
The washing machine is now ready for use.
using the washing machine
1 Place the shaver in the holder and push the
lever down completely to lock the shaver into
place.
The charging light on the washing machine starts
blinking to indicate that the shaver is being charged.
2 Press the start button to start the cleaning
program.
The cleaning light starts blinking and the shaver is
automatically lowered into the cleaning fluid.
During the cleaning program, which takes
,
approx. 1 hour, the cleaning light blinks
continuously.
During the first phase of the cleaning program,
,
the shaver automatically switches on and off
several times and is put in different positions.
During the second phase of the cleaning
,
program, the shaver is placed in the drying
position. It stays in this position until the end of
the program. The cleaning light starts burning
continuously.