Remote Control - Faber Skylift Manual De Uso

• Clean the hood using a damp
cloth and a neutral liquid de-
tergent.
L1 = L2 = L3 = L4
Max. 1 Mt
Controls
L
Button Function
L Turns the lights On/Off.
T1 Hood Down
Press for 2 seconds to raise
the Hood.
On/Off.
Hood Up
Press once: The Hood lowers.
Press a second time: The
Hood Stops.
When the movement has been
completed the motor turns on
at Speed two.
Z
T1
Display
-
On/Off
Off/Off
The electronic control system recognises and
signals two types of fault
Led T1
Current absorption threshold exceeded:
If an overload condition occurs, the fault
is signalled by LED T1 on the keyboard
nothing is blocking normal hood movements.
The signal remains active until a new hood
open/close command is given.
Hood opening safety microswitch
tripped:
If the safety microswitch trips, the fault
is signalled by LED T1 on the keyboard
means that the hood has passed the mi-
croswitch........ Call Technical Assistance!
You can continue to use the hood's light
and motor functions while this fault is active.
Whenever the motor is on, LED T1 will
is still present.

Remote control

The appliance can be controlled using
a remote control powered by a 1.5 V
carbon-zinc alkaline batteries of the
standard LR03-AAA type (not included).
• Do not place the remote control near
to heat sources.
• Used batteries must be disposed of
in the proper manner.
5