Remote Control - Faber IN-LIGHT EV8P Manual De Instrucciones

Remote control

The appliance can be controlled using a re-
mote control powered by a 1.5 V carbon-zinc
alkaline batteries of the standard LR03-AAA
type (not included).
• Do not place the remote control near to
heat sources.
• Used batteries must be disposed of in the
proper manner.
Motor On/Off.
Decreases the working speed each time it is
pressed.
Increases the working speed each time it is
pressed.
Activates/Deactivates Intensive operation.
Brief pressure: Activates/Deactivates the Delay
function: automatic switch-off with a 30' delay.
The display shows the operating speed and the
Press for 2 seconds: Activates/Deactivates the
24h function: turns the suction motor on at speed
one and effects one 10 minute extraction every
hour. The display shows the number 24 and the
Lights On / Off.
Lighting
• For replacement contact technical support
("To purchase contact technical support").
7