Wiseup WI-FI 21 Guia Del Usuario página 3

All manuals and user guides at all-guides.com
4.2.1. Slide the power switch to the position next to the reset button to power on the camera. The
red and blue indicator lights will illuminate for 3 seconds and go out. 15 seconds later, the blue
indicator light will stay illuminated and the red one will start blinking, indicating the camera has
entered into P2P mode.
[Note]:
1. The camera's Wi-Fi signal will take 1-2 minutes to appear on your smartphone or tablet PC.
2. If the camera's Wi-Fi signal cannot be found on your smartphone or tablet PC, please reset or recharge the
camera, and then try it again.
Q: How to reset the camera?
A: Simply press the Reset Button for 2 seconds to reset the camera. The red and blue indicator lights will go out.
Wait 15 seconds and the camera will restart automatically.
4.2.2 Go to Wi-Fi Setting page on your smartphone or tablet PC and connect to the camera's Wi-Fi
signal. The camera's Wi-Fi network SSID starts with "KD***********" and will appear on your Wi-Fi
setting page as follows:
(Android) (iOS)