Bluetooth Operation - Tivoli Audio MUSIC SYSTEM BT Instrucciones

6. 7, 8, 9, 0: Use these buttons in addition to the 1-6 buttons to access a CD track directly. A two
second window is provided to enter another digit after the first digit is entered.
Saved favorite station presets can be recalled using the 1 through 6 buttons on the remote control.
Controlling volume via the remote is performed using the up/down arrow buttons, while FM/AM
tuning is controlled using the Left and Right arrow (CD track) buttons.
When operating the remote control at close distances the display might pulse. This is normal
and is a direct result of the remote's ability to operate at greater distances.
When it comes time to replace the remote control's battery, use a 3V Lithium Cell #CR2025,
installed with the positive side facing the bottom side of the remote.
Menu
Press and hold the volume knob on the Music System BT, or press and hold the Menu button on
the remote control, to enter the main menu. Rotate the knob and press in to change the items within
the menu, or use the remote's pq buttons and Select button.
1. AUTO SCAN (NOT IN AUX OR BLUETOOTH MENUS): Press the Select button and use the
pq arrow and Select buttons to enable or disable Auto Scan. When enabled, Auto Scan will
automatically tune the next station received each time the pq buttons are pressed. When
disabled, the pq buttons can be used to manually navigate the frequencies.
2. RDS TEXT (NOT IN AM, AUX, OR BLUETOOTH MENUS): Press the Select button and use the
up/down arrow and Select buttons to choose between FM RDS scrolling text On, Off, or Static
(text will be displayed but will not scroll).
3. AUTO UPDATE (NOT IN AM, AUX OR BLUETOOTH MENUS): Press the Select button and use
the pq arrow and Select buttons to choose between On or Off. For the auto update to work,
you must have consistent reception of FM RDS with a time/date signal provided. It could take
up to a minute or more for the clock to update. Tivoli Audio is not responsible for inaccurate
time/date information provided by the auto update signal. To set the clock manually, select "Off",
and set the time and date using the "Clock" button.
4. FM TUNING STEP (NOT IN AM, AUX, OR BLUETOOTH MENUS): Choose 100 or 50 kHz FM
tuning step. 100 kHz is recommended.
5. FACTORY RESET: Press Select and use the pq and Select buttons to confirm (Yes) or reject
(No) the factory reset. A factory reset will restore factory defaults and cancel all your personal
settings such as presets.

Bluetooth Operation

Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not
connected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Switch the Music System BT's source to Bluetooth/AUX using the source button. This will power
on the Bluetooth. Turn the volume up about ¼ to start. Also turn up the volume on the source
device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select "Tivoli Bluetooth (Not Paired)" when it appears on your device's screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli Bluetooth" will change
from "Not Paired" to "Connected".
11 – ENGLISH