Bellman & Symfon BE1431 Manual Del Usuario página 54

Installation
1 Remove the battery pull tag to start the telephone transmitter. Clean the
wall with the wet wipe and remove the protective film from the Velcro.
2 Mount the telephone transmitter on the wall. You can also use a screw and plug.
3 Connect the telephone adapter between the telephone plug and the socket.
1
103 Installer's Guide
2
3
Testing
1 Use your mobile phone to call the landline telephone.
2 When the landline telephone rings, the Visit receiver lights up a telephone
symbol and indicates with sound, lights or vibrations (depending on the
receiver). If it doesn't react, read the section Advanced testing.
1
2
Installer's Guide 104