During Use; After Use; Before Use - Skil 1734 Manual Original

Ocultar thumbs Ver también para 1734:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
power tools.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired

before use.

maintained power tools.
Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR HAMMERS
GENERAL
Do not work materials containing asbestos (asbestos
is considered carcinogenic)
making any adjustment or changing any accessory
ACCESSORIES
when original accessories are used
BEFORE USE
Secure the workpiece (a workpiece clamped with
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
an electrical shock)
wear a dust mask and work with a dust
extraction device when connectable
work with a dust extraction device when
connectable

DURING USE

Wear ear protectors
hearing loss)
Use auxiliary handle(s), if supplied with the tool
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord
handle H 2 and take a secure stance

AFTER USE

standstill
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
USE
4
With wheel A 2
rotation
! change direction of rotation only when tool is at a
complete standstill
9
! clean and lightly lubricate the SDS+ accessory
before insertion
SDS+ chuck while turning and pushing it until it
! the SDS+ accessory requires freedom of
movement which causes eccentricity when tool is
9
wear a dust mask and
always use auxiliary
5
6
7
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1734 la

Tabla de contenido