Declaration Of Conformity; Maintenance / Service - Skil 1734 Manual Original

off-load; however, the accessory automatically
centres itself during operation without affecting
drilling precision
! do not use bits with a damaged shank
! select operating mode only when tool is switched
off and plug is disconnected
slight pressure on the tool when the drill bit is in
contact with the workpiece
! while working, always hold the tool at the
grey-coloured grip area(s)
- always use auxiliary handle H (can be adjusted as
illustrated)
APPLICATION ADVICE
! only use sharp bits
! clean and lightly lubricate the SDS+ adapter
before insertion
SDS+ chuck while turning and pushing it until it
- set switch F 2 to normal drilling (only activate when
tool is switched off and plug is disconnected)
the wood

MAINTENANCE / SERVICE

! disconnect the plug before cleaning
0
!
@
2
#
not standard included) $
2 and insert adapter in
%
^
&
*
not standard included) $
power tools
- send the tool undismantled
the tool are listed on www.skil.com)
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(
disposing occurs

DECLARATION OF CONFORMITY

2011/65/EU
Technical file at
1Öêàáå"îÖå"ÚÛê",ççÜÚÛå
3èÛêÖìàçåë"ﾏ")åÝàåÛÛêàåÝ
7/-0")íêçèÛ"&: "♂"∞♀"&("&êÛÚÖ "20
09.12.2013
NOISE/VIBRATION
✱
✱
increase
reduce
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
10
3ãÖÜ"(àáâÝêÖÖÜ
%èèêçîÖã"1ÖåÖÝÛê