Samsung SCC-B5331 Manual Del Usuario página 27

How to use OSD Menu
All manuals and user guides at all-guides.com
WHITE BAL
DAY/NIGHT
BRIGHTNESS
MODE
RED
BLUE
R-GAIN
B-GAIN

Note :
You can set the values of R-GAIN and B-GAIN only in
–
AWC mode.
– If AGC is set to OFF or FIX, you can not access the
NIGHT menu.
– For adjusting the white balance, the following
5 modes are provided:
• ATW1(Auto Tracing White Balance mode
1): The camera can automatically adjust the
color temperature in real time, according to
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
• ATW2: The color temperature ranges from
approx. 2,000K to 10,000K.
• AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
• 3200K : Set color temperature to 3200K
• 5600K : Set color temperature to 5600K
– RED : Adjusts the strength of the red color.
– BLUE : Adjusts the strength of the blue color.
22 – DIGITAL COLOR DOME CAMERA
NIGHT
MID
AWC
[00]----I----
[00]----I----
[0248]
[0247]
– R-GAIN/B-GAIN : Enables you to set the current
color temperature manually.
– BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
❖
DIGITAL ZOOM
You can set the digital zoom factor and position.
If you press the SETUP switch with the DIGITAL
ZOOM function set to ON, you will see the
appropriate screen.
When the zoom factor and position are defi ned,
the digital zoom function will operate.
DIGITAL ZOOM
RATIO
< LOCATION >
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
effective screen as well using the

Note :
If the digital zoom factor is set to larger than 1x, the FENCE
–
function will be deactivated.
The DIGITAL ZOOM function enlarges the pixel itself, which can
cause deterioration of the quality.
[ON/OFF]
[X1.0]
switch.