Toshiba MML-AP0071BH Manual De Instalación página 8

Aparato de aire acondicionado unidad interior
Ocultar thumbs Ver también para MML-AP0071BH:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 84
3
INSTALLATION OF INDOOR UNIT
1. Remove foamed polystylene cushion for protection
during transportation, which is entered under left/
right side plate of the main unit and electric parts
box.
Also, when installing the unit, remove tape for
transportation adhered to the electric parts box.
2. Install the indoor unit before lining the wall.
Fixing of unit
Fix the indoor unit to the floor and wall by attaching two or four M8 anchor bolts to the position in the following figure
to tighten and fix with nut utilizing holes at left/right side plates.
In case of fixing indoor unit to floor
<Indoor unit viewed from overhead>
(Front side)
A
B
Model MML-
AP0071BH to AP0121BH
AP0151BH to AP0241BH
* Attach and fix the electric parts box to the wall under
condition that electric parts box to be attached to the
side face is removed. Remove the electric parts box
as follows.
<How to remove the electric parts box>
1. Remove two mounting screws at upper side of the
electric parts box.
2. Slide the electric parts box to the arrow mark (
and remove it from the set.
Electric parts box
mounting screws
(2 pcs)
Electric parts box
All manuals and user guides at all-guides.com
<Indoor unit viewed from front side>
A
B
580
610
880
910
ñ
),
For installation of the wired remote controller, follow
the Installation Manual attached with the remote
controller.
For installation of the wireless remote controller, follow
to the Installation Manual attached to the remote
controller.
• Do not put the remote controller on the place where
• Operate the remote controller, check the indoor unit
• Install the remote controller 1m apart from the
5
Tape for transportation
Electric parts box
Foamed polystylene cushion
(Both left and right)
In case of fixing indoor unit to wall
(Floor)
A
B
Model MML-
AP0071BH to AP0121BH
AP0151BH to AP0241BH
Installation of remote controller
(Sold separately)
is exposed to direct sunlight or near a stove, etc.
surely receives the signal, and then install the
remote controller. (Wireless type)
devices such as TV or stereo. (Image may be
disturbed or noise may be output.) (Wireless type)
Hole is provided
to rear side.
A
B
580
610
880
910

Publicidad

Tabla de contenido
loading

Tabla de contenido