Preparing The Cable; Power Adapter Cable; Video Cable; Cable Connection - Samsung SCC-641 Manual Del Usuario

Preparing the Cables
To install and use the SCC-641(P), the following cables should be prepared.

Power Adapter Cable

The cable connected to the Power input terminal of the SCC-641(P) is shown below with
a rated voltage of 24VAC and ampacity of 1.5A.

Video Cable

The SCC-641(P)'s cable is a BNC Cable for connecting the video-output terminal to
the video-input terminal of the monitor.
2-5
All manuals and user guides at all-guides.com

Cable Connection

1. First, connect one end of the BNC video cable connector to the Video Output
2. Then, connect the other end of the connector to the Video Input Terminal of
3. Now connect the Power Adapter Cable. Use a driver to screw one part of the two
4. Adjust the switch below the Power Adapter to the proper voltage. Then, connect
5. Connect the Remote Control Terminal of the SCC-641(P) and the external
Terminal (VIDEO OUT)
the monitor.
lines of Power Adapter to Power Input Terminal of the SCC-641(P).
the Power Adapter's plug to the Power Connector.
Controller.
E
2-6