Auto Mode; Auto Pan - Samsung SCC-641 Manual Del Usuario

AUTO MODE

AUTO PAN and PATTERN functions are in AUTO MODE.

AUTO PAN

After selecting the locations of two points (PAN/TILT) of START and END, it loops
continuously in the set up SPEED.
** MAIN MENU **
CAMERA...
VIDEO SET...
PRESET...
AUTO MODE...
ALARM SET...
OTHER SET...
START SET
From "START SET..." get into the START SET setup
screen by pressing [ENTER]. After selecting the
locations of PAN/TILT location, press [ENTER] again to
return to higher menu.
3-18
All manuals and user guides at all-guides.com
(AUTO MODE)
AUTO PAN ...
PATTERN SET 1...
Press
[Enter]
RET
AUTO PAN
START SET ...
END SET ...
DIRECTION RIGHT
Press
ENDLESS ON
SPEED STEP5
[Enter]
DWELL TIME 2 S
EXIT QUIT
SET START!
END SET
"END SET" gets into the END SET setup screen by
pressing [ENTER]. Adjust PAN/TILT location and
press [ENTER] to return to a higher menu.
DIRECTION
Set up the movement direction of the START to END location (PAN location standard)
"RIGHT " : "LEFT " :
ENDLESS
This is a 360-degree rotation function that only stops for the DWELL TIME in the START and
END positions. It can be set to "ON" or "OFF".
SPEED
This is a setting function for movement speed setup. It can be set from STEP1 to
STEP64.
DWELL TIME
This is a function for setting up the time to stay in the START to END position.
SET END!
E
3-19