Safety Information; General Safety Notes; Notes On Ul Approval; Intended Use - SICK WSE16 Serie Instrucciones De Uso

1

Safety information

1.1

General safety notes

1.2

Notes on UL approval

2

Intended use

3

Operating and status indicators

8020353 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
Not a safety component in accordance with the EU Machinery Directive.
■
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
■
the sensor.
The device must be supplied by a Class 2 source of supply.
UL Environmental Rating: Enclosure type 1
The WSE16 is an opto-electronic through-beam photoelectric sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A sender (WS) and a receiver (WE) are required for operation. If the product is
used for any other purpose or modified in any way, any warranty claim against SICK AG
shall become void.
20 20
1
7,8
2
Ø 12,9 Ø 12,9
7,7
5
Figure 1: Dimensional drawing 1, cable
Center of optical axis, sender
1
Center of optical axis, receiver
2
Fixing hole Ø 4,1 mm
3
Connection
4
LED indicator green: supply voltage
5
active
LED indicator yellow: status of
6
received light beam
BluePilot blue: alignment aid
7
42
4,1
1
29,9
35,5
3
6
4
6,5
3
15
27,8
6 7
Figure 2: Dimensional drawing 2, male con‐
nector
SAFETY INFORMATION
4,1
20 20
2
17,5
4
M12 M12
7,5
5
1
42
29,9
52,9
6
3
6,5
3
15
28
35,5
6 7
5