Safety Information; General Safety Notes; Intended Use - SICK RSB Manual De Instrucciones

OPERATING INSTRUCTIONS
2

Safety information

2.1

General safety notes

en
2.2 Notes on UL approval
2.3

Intended use

26 O P E R A T I N G I N S T R U C T I O N S | RSB - Roller Sensor Bar
O The LED is illuminated continuously.
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
Do not install the sensor at locations that are exposed to direct UV radiation
(sunlight) or other weather influences, unless this is expressly permitted in the
operating instructions.
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
■
the sensor.
UL Environmental Rating: Enclosure type 1
NOTICE
RSB1-xxxxxxxxxxxxxE:
The RSB with Molex 2x2 connection is UL Recognized
The Roller Sensor Bar (RSB) is an opto-electronic photoelectric energetic proximity
sensor (referred to as "sensor" or "RSB" in the following) for the optical, non-contact
detection of objects, animals, and persons. If the product is used for any other purpose
or modified in any way, any warranty claim against SICK AG shall become void.
8027085/2022-05-31 | SICK
Subject to change without notice