Jvc Remote Application - JVC KD-T822BT Manual De Instrucciones

JVC Remote Application

You can control the JVC car receiver from Android device (via Bluetooth)
using JVC Remote application.
For more information, visit <https://www.jvc.net/cs/car/>.
Preparation:
Install the latest version of JVC Remote application on your device before
connecting.
Start using JVC Remote application
1 Start up the JVC Remote application on your device.
2 Connect your device.
• Pair the Android device with this unit via Bluetooth. (Page 11)
3
Select the device to use from the menu.
See the following "Settings to use JVC Remote application".
Settings to use JVC Remote application
1
Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
10
ENGLISH
[REMOTE APP]
[ANDROID
LIST]
[STATUS]
.
Selects the Android device to use from the list.
Shows the status of the selected device.
[ANDROID CONNECTED]: You are able to use the application using the Android
device connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use the
application.
Default: [XX]