Temperature Adjustment - AEG SANTO Instrucciones De Servicio

Ocultar thumbs Ver también para SANTO:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Ofrecido por www.electromanuales.com

Temperature Adjustment

With the individual temperature setting buttons the desired
temperatures in the refrigerator and in the freezer compartment can be
adjusted independently of one another.
3
In the LONGFRESH 0 °C cold zone the temperature is automatically
controlled. It remains constant at about 0 °C, no setting is required.
Note: Your appliance is equipped with a dynamic circulating air cooling
function. To adapt the refrigerating capacity required in the fridge zone
and the LONGFRESH 0 °C cold zone in a optimum manner, the fan is
operated at different powers. Because of this, different fan noises are
discernable due to the length of time it is switched on and the speed.
This is normal - there is no malfunction or defect.
0
1. Press either the „+" (WARMER) or „-" (COLDER) button for the refriger-
ator or freezer compartment .
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2. To adjust to a warmer temperature, press the „+" (WARMER) button. To
adjust to a colder temperature, press the „-" (COLDER) button. The
changed setting is immediately displayed on the temperature display.
Each time the button is pressed the temperature is adjusted by 1 °C.
Adjustable temperature range for the freezer compartment:
-15 °C to -24 °C.
Adjustable temperature range for the refrigerator compartment:
+3 °C to +8 °C, +15 °C (Holiday mode)
3
Note: From a food science point of view, +5 °C for the refrigerator
compartment and -18 °C for the freezer compartment should be consi-
dered cold enough as a storage temperature.
3. When the buttons are not further pressed after an adjustment has been
made, after a short period (approx. 5 sec.) the temperature display
switches over and again displays the ACTUAL temperature in the refrig-
erator compartment. The display changes from flashing to illuminated
numbers.
3
When the setting is changed, the compressor does not start immedi-
ately if automatic defrosting is currently taking place.
Important! Please check red warning indicator light and temperature
display regularly to assure maintenance of the storage temperature.
818 41 56-00/1
23

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido