Other Maintenance Tasks; Other Functions - Krups EVIDENCE ECO EA897 Manual Del Usuario

OTHER MAINTENANCE TASKS

Maintenance Maintenance When? When?
Coffee flushing We recommended Allows you to rinse the
45 s - 30 ml
you to rinse the coffee machine's coffee circuit. This
system daily or when process only uses hot water.
not used for a longer It ensures the authentic
period (more than 2 taste of your coffee and
days). guarantees that your
machine has a long life.
Machine When the machine To preserve coffee flavor
Cleaning asks you. and for hygienic reasons, we
recommend you to clean
13 min - 600 ml
and degrease the machine.
It guarantees you optimal
preservation of the aromas
of your drinks.
Descaling The appliance notifies Descaling your machine
20 min - 600 ml
you when a descaling ensures its proper
program is necessary. functioning and eliminates
any deposit of limescale
or tartar This step is ery
important to ensure the
proper functioning and
longevity of your appliance.
!
Important : You do not have to run the maintenance programme as soon as the appliance requests it, but you must do
it reasonably soon after. If the cleaning is postponed the alert will remain displayed as long as the operation
has not been performed.
!
Important : If you unplug your machine during maintenance or in the event of electrical failure, the cleaning
programme will resume from the start. It will not be possible to postpone this operation: it is mandatory
to rinse the water circuit. In this case a new cleaning tablet may be necessary.
72
Explanation Explanation Actions required Actions required
Place a container under the coffee
nozzle
• Turn on your machine then press
• Choose the rinse function
• Press to begin rinsing.
Accessory required: 1 KRUPS cleaning
tablet (n°1) and a container with at
least 600 ml capacity.
When the machine requests it, the white
or red white warning LED and the
LED on the interface will light up.
See chapter 10 "FULL AUTOMATIC
CLEANING OF THE MACHINE 3x / YEAR
- 13 MIN" of the quick start guide
You can also carry out cleaning when you
wish by pressing the and choosing
the cleaning programme, indicated by
the LED .
Accessory required: 1 KRUPS
descaling sachet (n°3) and a
container with at least 600 ml
capacity.
When it is necessary to run a descaling
programme, the appliance notifies you.
When the machine starts up, the white
or red white warning LED and the
LED on the interface will light
up. Next, see chapter 11"DESCALING
PROGRAM – 20 MIN" of the Quick
Start guide.
Once the function is active, you can also
begin descaling the machine on demand
by pressing and selecting
HOW TO ACCESS YOUR MACHINE'S SETTINGS
As this machine does not have a screen, the settings are integrated as a second function of certain buttons.
To access the settings menu:
• The appliance must be plugged in but not switched on
• Press for 3 seconds
• When the LEDs under the first three recipes blink and you hear a beep, you are in the settings. You can then navigate using
the ristretto, espresso and long coffee buttons.
List of settings:
Coffee temperature
Low
T1 :
Medium
T2 :
High
T3 :
Auto OFF
10 min
20 min
30 min
Automatic rinsing
Active
Inactive
To exit the settings menu:
• Press the button to exit the menu.
• The machine will switch off and save the settings.
.

OTHER FUNCTIONS

Press then to set the coffee temperature. There are 3 temperature adjustment
levels for your coffee drinks.
You can choose the length of time after which your selected appliance will automatically
turn off in order to optimise your energy consumption: 10 minutes, 20 minutes or
30 minutes.
Press then to adjust auto off.
You can have your machine automatically carry out rinsing every time it is switched
on. The default setting is inactive. Press then to set auto rinsing to ON.
73