General Maintenance - Krups EA69 Serie Manual

01_IFU-KR_COFFEEMAKER_EA6910_EN_Mise en page 1 28/05/10 14:49 Page14
Remove your waste Again press the 'Service' key.
water container and the The 'calc' light will become
drip tray then fit them steady. A second automatic
again. cycle will last 6 minutes.
Your appliance is now ready for use again.
!
Caution! : Be sure to complete the entire scale removal cycle to avoid any risk of intoxication.
The scale removal cycle is a continuous cycle. Do not put your hands under the coffee
outlets and steam nozzle during the cycle.
10.4 Long rinsing program
n The appliance will warn you when you need to perform long rinsing through
the "clean" and "calc" lights flashing.
Remove, fill and replace
the tank.

10.5 General maintenance

n Always remove the power supply cord from the socket and let your appliance cool down before cleaning it.
n Do not use utensils or cleaning products likely to scratch or corrode the appliance.
n Wipe the body of the appliance on the outside using a moist cloth.
Clean the cleaning tray, the drip tray and its grid, the
coffee grounds collector and its front part using
SERIE EA 6910
warm water and washing up liquid detergent.
All manuals and user guides at all-guides.com
Once the second
rinsing is finished, the
'calc' light will go off.
Under the coffee outlets
and steam nozzle place a
recipient that can contain
at least 0.15 L.
To make the cleaning of the coffee grounds collec-
tor easier, dismantle it as shown above.
Empty the drip tray and
then fit it again.
Press the "Service" key to
start up the long rinsing
program. The "clean" and
"calc" lights will become
fixed.
ENGLISH
Empty and then fill your
water tank.
+
Once long rinsing has
been completed, the
'clean' and 'calc' lights
will go off.
Rinse the water tank
with fresh water.
14
14