Technical Data; Noise Information; Vibration Information - Worx WX760.1 Manual Del Usuario

TECHNICAL DATA

Type Wx760.1 (760~764-designation of machinery, representative of cut off machine)
Rated voltage
Rated power
Rated no load speed
Disc size
Disc bore
Double insulation
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA WA
Wear ear protection when sound pressure is over

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials is cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
Cut off saw
All manuals and user guides at all-guides.com
Vibration emission value a
Uncertainty K = 1.5m/s²
220-240V~50/60Hz
2300W
3500/min
355mm
25.4mm
18.5kg
L :95dB(A)
pA
L :106dB(A)
wA
3.0 dB(A)
80dB(A)
= 5.67m/s
2
h
EN
/II
7