Astralpool 32582-0100 Manual De Instalación Y Mantenimiento página 5

All manuals and user guides at all-guides.com
"Important: This instruction manual contains basic information with respect to safety measures
which should be adopted during installation and putting into service. For this reason, it is
essential that both the installer and user carefully read these instructions before carrying out
any installation or putting into service operations."
In order to obtain optimum performance from the automatic valve, it is recommended that the
instructions given below are strictly followed.
General safety prescriptions:
These symbols
respecting the corresponding prescriptions.
DANGER. Risk of electrocution. The lack of warning of this prescription involves a risk of
electrocution.
DANGER. The lack of warning of this prescription involves a risk of personal injury or material
damages.
WARNING. The lack of warning of this prescription involves a risk of damage to the automatic valve
or the installation.
GENERAL SAFETY REGULATIONS
GENERAL.
The valve described in this manual has been specially designed to provide correct water circulation
in the swimming pool during the various operational phases.
It has been designed to work with clean water at temperatures not exceeding 35ºC.
The installation must be carried out in accordance with the specifi c instructions for each particular
implementation.
Current in-force regulations for the prevention of accidents must be observed.
Any modifi cation to the valve's electronic module requires the prior authorisation from the
manufacturer. Original spare parts and accessories authorised by the manufacturer will guarantee
greater safety. The manufacturer of this automatic valve is exempt from all responsibility for any
damage caused by non-authorised spare parts or accessories.
During operation, the valve's electric and electronic parts have electric power connected to them.
Any work to the automatic valve and any equipment connected to it, must only be carried out when
the start-up devices have been disconnected.
The user must ensure that installation and maintenance work is carried out by adequately qualifi ed
and authorised personnel, and these have previously carefully read the installation and service
instructions.
Automatic valve operational safety is only guaranteed by full compliance and respect of the installation
and service instructions.
The maximum voltage values must never be exceeded under any circumstances.
In the case of incorrect operation or a fault, please contact the closest manufacturer's representative
or technical assistance service.
indicate the possibility of danger as the consequence of not
5
ENGLISH