Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Engine Timing Tool Set for Ford / Volvo
TOOLS
1 Crankshaft Pulley Holding Tool,
to be used as OEM 999 5433 / 303-1179
2 Camshaft Alignment Tool,
to be used as OEM 303-1178
3 Crankshaft Alignment Tool,
to be used as OEM 303-1182
4 Camshaft Holder,
to be used as OEM 303-1183
INTENDED USE
This tool set is made for setting the camshaft and crankshaft timing when e.g. replacing cylinder head
gasket and it is suitable for:
Ford: Focus, Mondeo, S-Max 2.5 ST, Galaxy 2.5 ST (2005-)
Petrol: 2.5 Turbo (Euro 4), HUBA / HUWA / HYDA
Volvo: C30 (06-10), C70 (98-10), S40 (96-10), S60 (00-09), S70 (97-07), S80 (98-06),
V40 (96-10), V50 (04-10), V70 (97-07), XC70 (02-07), XC90 (02-10)
Petrol: 1.6 B4164S, 1.8 B4184S, 1.9T B4194T, 2.0 B4204S / B4204T, 2.0T B5204T3
2.0T B5204T4 / B5204T5, 2.3 B5234FS, 2.3T B5234T3 / B5234T7 / B5234T9,
2.4 B5244S / B5244S2 / B5244S4 / B5244S5 / B5244S7, 2.4T B5244T / B5244T3
2.4T B5244T4 / B5244T5 / B5244T7, 2.5R B5254FS
Diesel: 2.4D D5244T9, 2.4D5 D5244T8 D5244T13
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATION
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9738
1
1
2
3
2
4
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
