Oase ProfiClear Premium XL Instrucciones De Uso página 23

Replacing the aerator rod
Preparatory work:
 Remove ClearWave. (→ ClearWave Disassembly and cleaning)
How to proceed:
1. Pull the aerator rod out of the clamp holder.
2. Pull the hose off the aerator rod and fit it to the new aerator rod.
– Fasten the hose with a cable tie on the connection.
3. Push the aerator rod into the clamp holder.
Storage/overwintering
Decommissioning depends on whether or not the unit is protected against freezing.
The unit is protected from freezing temperatures (e.g. stored in a garage or other enclosure)
The unit can be operated as long as the water temperature does not drop below +4 °C.
The unit is not protected from freezing temperatures (e.g. outdoor installation)
Shut down the unit at water temperatures below +8 °C or at the latest when freezing tempera-
tures are expected.
 Drain the water remaining in the unit, in the hoses, pipes and connections as much as possi-
ble.
 Open all slide valves to prevent water from pooling.
 Cover the container to prevent rain water from entering.
 Protect any lines and slide valves from which you cannot drain the water against freezing.
EN
Proficlear0220
23