Jocel JCEI60-014535 Manual De Instrucciones página 28

USE INFORMATION
Section 6-1
Control panel is provided with 4 buttons:
1. Button 1 – Turn on/ Turn off lighting;
2. Button 2 – Speed 1 (minimum)
3. Button 3 – Speed 2 (medium)
4. Button 4 – Speed 3 (maximum)
The control panel is designed to control hood fan and light. There are 4 buttons on the
front surface:
• The control 1 is for light control. When touched, the lighting inside the hood turns on
and turns off when touched again.
• The control 2 is used for hood fan adjustment. It becomes active when touched. When
it is touched again, the fan turns off. The control 2 is the position where the engine runs
at the minimum level.
• The control 3 is used for hood fan adjustment. It becomes active when touched. When
it is touched again, the fan turns off. The control 3 is the position where the motor runs
at medium level.
• Button control 4 is used for hood fan adjustment. It becomes active when touched.
When it is touched again, the fan turns off. The control 4 is the position where the engine
runs at the maximum level.
• Switching between the controls 2-3-4 while the engine is running, can be changed
instantly. The light can be switched on and off at the same time while using the fan. The
hood can work for 1.5 hours without stopping at any cycle. It will turn itself after that
time.
1 2 3
27
4