• Mount it on its place after drying.
Notes:
− The change in color may be observed as the aluminum filters are washed. This is
normal and there is no need to replace the filters.
− It is also possible to wash the aluminum filter in the dishwashing machine.
REMOVING ALUMINUM FILTER
1. Push the lock of the aluminum filter forward.
2. Then, slightly lower it downwards and push forward. Otherwise, the filter can be
defected.
3. Wash the aluminum filter and mount it again into its place by applying the steps
mentioned above in reverse.
CARBON FILTER (NOT INCLUDED)
This filter removes the cooking smell. It cleans the circulating air within the kitchen in case
there is no possibility to use chimney. Physical life of the carbon filter of the device will
expire depending on the frequency of use and mode of cooking, and that of aluminum filter
will expire depending on the cleaning regularly. In usual use, it should be replaced once in
every 4 months at most.
REMOVING CARBON FILTER:
First remove the aluminum filters, and then the carbon filters.
1. To remove the carbon filter, turn it to the left and pull it towards yourself.
2. Mount a new carbon filter.
3. Mount the aluminum filters.
Section 7-2
Use soft cloth wetted with water to clean the exterior surface of the cooker hood. Never
use abrasive and scratching products for cleaning. The cloth must be applied in the same
direction with the brush in order to avoid scratching of the steel drum. The bulb glasses
must not be removed during cleaning.
CAUTION!
You may cause fire if you do not observe the rules pertaining to cleaning and replacing the
filters of the cooker hood.
29