Installing The Transformer With Twinfix - JANE CONCORD TRANSFORMER iPLUS Manual Del Usuario

_ INSTALLING THE TRANSFORMER WITH TWINFIX

Pull the TWINFIX button (09) forwards until the TWINFIX adapters (10) on the back of
the child seat are fully extended.
2.a
Position the TRANSFORMER facing forwards on the vehicle seat or bench fitted with
ISOFIX points. 2.b
Push the child car seat back and onto the ISOFIX points until the locking mechanisms
on both TWINFIX adapters (10) have clicked audibly into place and the safety
indicators on both adapters are green! 2.c
Pull the TWINFIX (09) button outwards and push the TRANSFORMER back until it
rests firmly against the backrest of the vehicle seat. Release the TWINFIX button (09)
when the seat is in the required position. 1.a
In cars with standard headrests, these may be adjusted or removed to make it easier
to install the child car seat. Please note that the car headrests must be replaced and
re-positioned correctly when an adult is travelling in the car.
1.b
EN
28