E_ Installing The Seat In The Car - JANE Balance Manual Del Usuario

Installing in the vehicle:
Ready for easy installation with the ISOFIX system (See section INSTALLING THE SEAT IN THE CAR of these
instructions).
Comfort and safety for the baby:
Integrated 5-point harness, with a greater fastening area, so distributing the loads on the baby better in the
event of an accident.
Ventilation in the shell making it more breathable.
Impact absorbing material over the entire surface in contact with the baby.
Adjustable headrest with 5 different positions.
The safety seat can be reclined.
Fitted with insert for babies from 40 to 60 cm in height.
Convenience for parents:
The height of the shoulder straps can be adjusted without having to take the straps off. This action is connected to the
headrest so it protects the baby better in the event of a side impact while supporting the head.
The seat can be turned to face the door making it easier to place the baby in it.
Removable and washable upholstery.

E_ INSTALLING THE SEAT IN THE CAR

Before installing the safety seat, make sure that the vehicle seat where you are going to install it is i-Size, or that
it is fitted with ISOfix anchors and that your vehicle is on the list of compatible vehicles.
(See your vehicle instruction manual, it will tell you which of the vehicle seats are compatible with the safety seat.)
33
EN