Making Espresso Coffee - Proline CBE15 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
All manuals and user guides at all-guides.com
5.
Press HOUR repeatedly to set the desired hour.
6.
Press MIN repeatedly to set the desired minutes.
7.
After the timer is set, press ON. The green indicator light comes on to indicate the
appliance is ready to delay brewing.
8.
After the set delay time has elapsed, the red power indicator light will come on and the
appliance starts brewing.
PRE-HEATING
To make a cup of good hot espresso coffee, we recommend you preheating the appliance
before making coffee so that the flavour would not be affected.
1.
Open the tank cover to fill with fresh, cold water. Replace the tank cover.
2.
Place the filter into the filter holder. Place a jug (not supplied) on the removable shelf.
3.
Attach the filter holder to the appliance by positioning it under the boiler outlet with the
handle towards the left, making sure the handle aligns the Insert arrow indicated on the
outlet. Turn the handle to the right until it firmly locked.
4.
Plug the appliance into the wall socket. "12:00" will appear on the display.
5.
Press ON/OFF for espresso coffee, the yellow indicator light comes on. Make sure the
espresso/frothing select button is set to the espresso position.
6.
When the green indicator light comes on, press the pump control button and the water
flows out. When the green indicator light goes off, press the pump control button again to
stop water flowing. The pre-heating process is finished.

MAKING ESPRESSO COFFEE

After preheating the appliance, the machine is ready to make espresso coffee.
1.
Insert the filter into the filter holder.
2.
Fill the filter with ground espresso powder.
Distribute the ground coffee evenly and press it lightly with the coffee tamper.
3.
Attach the filter holder to the machine by positioning the handle to the left of the boiler
outlet, then pushing upwards and turning the handle to the right until it locks.
4.
Place the cup under the filter holder spouts. You are recommended to heat the cup before
making the coffee.
5.
Make sure the green indicator light is on (if it is off, wait until it comes on), then press the
pump control button. Once the required quantity of coffee has been obtained, interrupt
delivery by pressing the pump control button again.
6.
To turn off the coffee maker, press ON/OFF and espresso/frothing select button to make
sure the yellow and green indicator lights go off.
7.
To detach the filter holder, turn the handle from right to left. To remove the used coffee,
lock the filter with the filter fixer and let the coffee fall out by knocking the overturned filter
holder.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido