Loading The Bottom Rack - Bosch SHU42L Manual De Uso Y Cuidado

Preparing and Loading the Dishware
Top Rack Accessories
Top Rack Flip Tines (SHE43C only)
Flip Tines fold down to make loading the racks
easier in
some
instances.
Grasp the
tines as
shown in
Figure 6
and fold
the tines
downward.
When the
top rack
is loaded,
push it into the dishwasher.
NOTE : When pushing the top rack into the
dishwasher, push it until it stops against the back
of the tub so the top rack spray arm will connect
to the water supply.
Top Rack Height Adjustment (SHU42L only)
Remove the empty upper rack by pulling it out of
the dishwasher to the point that it can be lifted
upward, as shown in Figure 7.
Pull the rack outward and up until the rollers are
completely free of the roller guides.
Re-insert the rack with the other set of rollers on
the roller guides, as shown in Figure 8.
Figure 7
6
All manuals and user guides at all-guides.com
Figure 6
Figure 8
(continued)

Loading the Bottom Rack

Place large items in the bottom rack. Load pots
and pans upside-down. Figures 9, 10, 11, 12, and
13 show typical mixed loads for the bottom rack.
Figure 9
Figure 10
Figure 11