Repairing; Repairing The Chainsaw And Battery - Stihl MSA 160 C Manual De Instrucciones

17 Repairing

► File each cutter with a round file so that the following
points are observed:
– Round file matches the chain pitch.
– File from the inside to the outside of the cutter.
– Hold the file at right angle to the guide bar.
– Maintain a filing angle of 30°.
► File down the depth gauges with a flat file so that they are
level with the STIHL filing gauge and parallel to the service
mark. The STIHL filing gauge must match the chain pitch.
► If you have any queries: Contact your STIHL servicing
dealer for assistance.
0458-701-9921-E
17 Repairing

17.1 Repairing the Chainsaw and Battery

The chainsaw, guide bar, saw chain and battery cannot be
repaired by the user.
► If the saw, guide bar or saw chain is damaged: Do not use
your saw, guide bar or saw chain, and contact your STIHL
servicing dealer for assistance.
► If the battery has a malfunction or is damaged: Replace
the battery.
English
73