Getting To Know Your Monitor - Angelcare AC510 Manual De Usuario

If there is a lost connection between the two units after 15 seconds, the Out‑of‑Range
alarm will sound on the Parent Unit (refer to Troubleshooting section):
• The Out‑of‑Range icon will appear on the screen and on the info bar.
INFO BAR IMPORTANT ICONS
3.3 ‑ HOW TO SET THE DATE
When activating the Parent Unit for the first time, you'll be asked to set the date and time
in order to record temperature data. If you choose to skip this step, you can always go back
later by accessing the settings menu
22
3.4 ‑ HOW TO SET THE TIME
02
STEP 4 ‑ GETTING TO KNOW YOUR MONITOR
Your Angelcare ® monitor can be used with the pre‑programmed factory settings or you can
customize the settings to your preference.
IMPORTANT
To confirm your settings, you'll always need to tap the
Save icon at the bottom of the screen (icon will turn
blue if modifications needs to be saved).
54
All manuals and user guides at all-guides.com
Camera
displaying image
and sound
Temperature
VOX icon
alerts icons
Too Cold
Too Warm
Fully charged battery (only
appears when Parent Unit is
plugged in
.
1
18°C
2
08 2016
1
18°C
2
04
Volume Level
icons
Battery Level
Reception
indicators
Quality icons
Out‑of‑Range
1) Tap the Date Mode toggle button to
switch between Month/Day/Year and
Day/Month/Year display.
2) Set the day, month and year using the
up/down arrows
Save button to confirm your settings.
1) Tap the Time Mode toggle button to
switch between 12 h and 24 h mode.
2) Set the hours and minutes using the
up/down arrows
Save button to confirm your settings.
. Then tap the
. Then tap the