How To Set The Time; Getting To Know Your Monitor - Angelcare AC417 Manual De Usuario

4.4 ‑ HOW TO SET THE TIME
IMPORTANT
The Sensor Pad will be automatically ACTIVATED when the screen returns to video
display view.
STEP 5 ‑ GETTING TO KNOW YOUR MONITOR
Your Angelcare
customize the settings to your preference.
IMPORTANT
To confirm your settings, you'll always need to tap the
Save icon at the bottom of the screen (icon will turn
blue if modifications needs to be saved).
Adjust screen
Main settings menu
Show reporting
Exit or go back
into Main Menu
General Settings
Camera Settings
Movement Sensor Pad Settings
Temperature Settings
IMPORTANT
When in menu or sub‑menu modes, sound transmission between the Parent Unit and the
Camera will be temporarily deactivated. ONLY movement‑detection alarm will remain
active (if function is activated).
68
1
18°C
2
02 04
® monitor can be used with the pre‑programmed factory settings or you can
brightness
Pairing units
1) Tap the Time Mode toggle button to
switch between 12 h and 24 h mode.
2) Set the hours and minutes using the
up/down arrows
Save button to confirm your settings.
02:04 18°C
02:04 18°C
. Then tap the
Volume level
Pause Sensor Pad
Zoom
Activate Two Way
Talk microphone
Tap anywhere on
the screen to access
the feature functions
Save
customized
settings