Testing And Getting To Know Your Monitor - Angelcare AC117 Manual De Usuario

IMPORTANT ICONS
Temperature alerts icons:
Detection mode icons:
Indicates which functions are activated
Movement only
Sound only
Movement, Sound & "TIC"
Movement & Sound
Movement & "TIC"
VOX icon: Indicates when the
Nursery Unit is in VOX mode
Sound activated transmission
Continuous sound transmission
STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR
The Angelcare monitor can be used with the pre-programmed factory settings or you can customize your
®
settings to your preference.
All changes and adjustments
made in the main menu will
not be saved unless you
confirm them by pressing the
EXIT button.
5.1 - MENU ACCESS AND CHANGING THE SETTINGS
The MENU settings are accessed by pressing and HOLD the MENU button on the Parent Unit. The MENU functions
are in a loop. Each time you press the OK button briefly you move on to the next MENU function. Once you have
selected your preferred settings you must press EXIT MENU or your changes will not be saved. The MENU functions
are in the following order
PRESS & HOLD MENU: Movement ......................................................STEP 5.2
PRESS 1 TIME: MOVEMENT & TIC........................................................STEP 5.2
PRESS 2 TIMES: SOUND............................................................. STEP 5.5
PRESS 3 TIMES: VOX ............................................................. STEP 5.6
PRESS 4 TIMES: TEMPERATURE ........................................................STEP 5.7
Temperature display
Too Warm
Too Cold
Sound Sensitivity Indicator
(VOX ON)
(VOX OFF)
Connection icon: Indicates the
connection quality between the Parent
Unit and the Nursery Unit
Battery level icon: Indicates
Parent Unit battery life
IMPORTANT
When in MENU mode, sound transmission
between Parent and Nursery Units will be
temporarily deactivated.
Good connection
Medium connection
Poor connection
Out-of-range
Full
1/2
Empty
Charging
E
N
9