Heating; Heating During The Transition Period; Natural Stone Cladding; Special Information - Olsberg Fuego Compact Manual De Instrucciones

Heating

● Only place the quantity of fuel required to achieve
the heating requirement.
For a nominal heating output 5 kW:
- max. 1,5 kg billet wood; burning time >45 min
­ max. 1,3 kg wood briquettes; burning time >45 min
For max. heat output allowed:
- max. 3 kg billet wood
­ max. 3 kg wood briquettes
● Open the combustion chamber door slowly after
adding new fuel, as otherwise the combustion gas-
es can escape.
● Empty the ash pan or combustion chamber in good
time. Otherwise it is possible for the combustion air
intake to be blocked or for the grate to be damaged.
● Only remove the ash pan to empty it.
● Clean the ash pan compartment regularly after re-
moving the ash pan to remove any ash that may
have been spilled (e.g. use a vacuum cleaner).
Attention:
Any stove and ash residues must have been left to
cool before being removed.

Heating during the transition period

Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
depends on the external temperature. Therefore, if the
external temperatures are high (above 16°C) the deliv-
ery pressure can be disrupted.
What to do?
● Open the combustion air slide valve complete.
● Only put on a small quantity of fuel.
● Frequently stoke the ash.

Cleaning

What?
inside of stove
connection piece
glass panel
14
All manuals and user guides at all-guides.com
How often?
at least 1 x per year
at least 1 x per year
as required

Natural stone cladding

● This natural stone cladding may not be overheated,
as cracks could appear in the stone.
● Use a maximum of 3 kg wood or briquette (that are
2 suitable billet wood or 1 briquette) for heating.
● As the cladding as a natural product comes from a
„grown" boulder, structure and colour scheme may
be very different.
● The surface may be altered under temperature
influence.

Special information

The manufacturer's guarantee expires if the stove is
significantly or permanently overloaded above the
nominal heating output, or if fuels other than those list-
ed are used.
● The stove must only be used with the combustion
chamber door shut.
● Never remove hot ashes. Only store ashes in a fire-
proof, non-combustible container.
● Attention: The surfaces get hot! Always use the en-
closed glove when operating the stove.
● Never use white spirit, benzene or other inflamma-
ble, hazardous materials to ignite the fire.
● The combustion air supply fittings must never be al-
tered. In particular, it must be ensured that any nec-
essary combustion air pies are open while the fire-
place is being used.
● Do not make any changes or modifications to the
stove.
using glass cleaner for
stoves- and oven glasses
Using what?
hand brush,
vacuum cleaner
hand brush,
vacuum cleaner
when cold