Before Using For The First Time; Operation - Kitchenware Beautiful Manual De Instrucciones

Before Using for the First Time

1. Always unplug Stand Mixer and check to make sure the speed control dial
is in the ( 0 ) OFF position before inserting or removing attachments.
2. Wash mixing bowl and attachments in warm, sudsy water, rinse and dry.
3. Raise the mixer head. Firmly press the head tilt button to release and
lift the Stand Mixer head. (Fig. 1)
4. Lock mixing bowl onto the base. Insert the base of the mixing bowl into
the bowl rest and turn clockwise until it is locked securely in place.
(Fig. 2)
5. Add ingredients to the mixing bowl. (Fig. 3)
6. Attach the splash shield. Grasp the splash shield (use the filler hole
as a handle) and fit the opening over the locking pin on the mixer head.
Turn the splash shield clockwise until it locks into place. (Fig. 4)
7. Lock attachment onto the attachment shaft. Push attachment up onto
attachment shaft and turn counter-clockwise until securely locked.
(Fig. 5)
8. Lock mixer head down into working position. Press the head tilt button
while pressing the Stand Mixer head down into the bowl until it locks
securely into working position. (Fig. 6)
9. Your Beautiful Stand Mixer is now ready for use.
CAUTION: Hazard. To avoid injury, do not place fingers in hinge area.

Operation

1. Make sure the speed control dial is in the ( 0 ) OFF position; with the
mixing bowl, selected attachment (see Mixing Guide) and splash shield
locked into position.
2. Plug the cord into a 120V AC electrical outlet.
3. Turn the speed control dial from 0 to 1 to 4 to begin mixing
at low speeds. Gradually turn the speed control dial to higher speeds
as needed.
4. When mixing is complete, turn the speed control dial to ( 0 ) OFF.
5. Unplug the Stand Mixer when not in use and before cleaning.
19113, 19114, 19115, 19116, 19130 BTFL BTFL Stand Mixer IM r2.indd 12 19113, 19114, 19115, 19116, 19130 BTFL BTFL Stand Mixer IM r2.indd 12
12
2021-12-10 8:30 AM 2021-12-10 8:30 AM