Lenco DIR-141 Manual De Usuario página 10

Network configuration
1. Standard network configuration
After selecting this option the DIR-141 will scan for available 2.4Ghz WIFI networks.
The display will show available WIFI network
Select your WIFI network by rotating the Navigation/OK (6) wheel and confirm by pressing the
Navigation/OK (6) wheel.
If your selected WIFI network requires a password, you can enter it in the next screen.
Enter password by pressing the numeric keys(20) on the remote control, followed by the
Navigation right(15) button (NOTE: you have to press the navigation right(15) after every
character).
To make a correction, press the Navigation Left(14) to go backwards and delete the last
character at the same time.When the password is completed,press the OK(17) button to
confirm.
10