Teka RVU 10008 GBK Manual Del Usuario página 29

 Control System Instruction
① " " Button

To switch the power on/off. (Press and hold this button for approximately 3 seconds);
② " " Button

To raise (warm) the temperature in 1 ºC increments.
③ " " Button

To lower (cool) the temperature in 1 ºC increments.
④ " " Button

To control the interior light on/off.
⑤ indicator light

Compressor in operation display.
⑥ DISPLAY

To shows the set temperature.
 Setting The Temperature Controls
To set the temperature, connect the power cord to a properly grounded outlet In the

event of power interruption.
Set the desired cooling temperature by pressing the buttons adjacent to the "UP/DOWN"

indicators. Each depression of the buttons will scroll through the available temperature
setting in increments of 1 degree.
The temperature setting can be adjusted from 5°C -18°C

If you want to reveal actual temperature, please press and hold the " UP " or " DOWN "

button for 3 seconds, the LED will flash and display the actual temperature. After
stopping pressing the button for 5 seconds, LED figure will stop flash, then revert back to
display the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Replaceable (LED only) light source by a professional
This product contains a light source of energy efficiency class G.
OPERATING YOUR WINE COOLER
AND SETTING THE TEMPERATURE CONTROL
27