HP DesignJet T730 Information Guide página 7

Message or code
There is not enough ink in the installed cartridges
to complete the start-up routine. Replace indicated
cartridges.
Out of memory
Scanner paper jam
Scanner Dust detected
Scanner Out of memory
0001-0001
0081-0008
0001-0082
0021-0059, 0021-0017
0021-0161
0041-0017, 0042-0117
0079-0000
0085-XXXX
0086-0008
0009-XXXX
Input Voltage
Frequency
Input Current Max
Typical Power
All manuals and user guides at all-guides.com
Recommendation
A new printhead has been inserted without a new set of
ink cartridges. Replace the cartridges that don't have
enough ink to start-up the new printhead.
cannot process the job, which will be discarded.
The printer cannot complete the job. Resend the job,
selecting
Advanced
features.
Open scanner cover and clear the jam.
Scanner cleaning is recommended.
Scan at a lower resolution and / or Increase compression.
See the User guide for more information.
Restart the printer.
There may be a paper or carriage jam. Check and clear the
paper path if necessary.
The battery of the real-time clock has expired; contact HP
Support.
Service station error. There may be a paper or carriage
jam. Check and clear the paper path if necessary and
restart the printer.
Service station error. Restart the printer.
There may be a paper or carriage jam. Check and clear the
paper path if necessary.
Restart the printer. If the problem persists, update the
Feeding paper problem. Restart the printer.
There may be a paper or carriage jam. Check and clear the
paper path if necessary. Also clean the carriage encoder
strip.
Scanner error. Restart the printer.
Send job as bitmap in the driver: go to the
tab, then Document options >
T730/ T830
100-240 10% V
50/60 3 Hz
1.2 A
35 W
Introductory Information
Printer
5